This guide shows how to speed up downloads in the freeware bittorrent client, µTorrent for Mac. All bittorrent programs need to have their incoming and outgoing communications flow freely in order to achieve the highest download speeds and that is what this guide is about. .
This guide was put together using information given by the developers of bittorrent programs at their forums, guides and FAQs. There are no secret tricks, just the real basics of proper set up of a bittorrent program. Following these simple steps should result in increased download speed.
These are the basic principles of optimizing a bittorrent client, like µTorrent, for speed:
- Choose a proper port to avoid ISP blocks and conflicts with other programs
- Forward that port through any software firewall and router to allow incoming connections
- Adjust internal settings based upon upload capacity of the internet connection to allow room for outgoing communications and to distribute upload efficiently.
There are some programs that claim to optimize speed in µTorrent. Such programs are a scam and generally contain adware or spyware. I have seen it said, by the developers of all bittorrent programs, that nothing will increase your download speed in a bittorrent client more than the basic steps set forth herein.
This guide was put together using screenshots that I found online, which I beleive are from µTorrent for Mac version 1.8.0. The basic principles above apply to all bittorrent clients. The only issue is where they are located in the client. I do not have a Mac and can not confirm that these are accurate screenshots, but I believe they are.
If you are not using µTorrent for Mac, there are several other specific guides for other clients and a general guide here:
Optimizing Bittorrent Clients
Choosing A Proper Port
To avoid messing up a network connection that is already cleared, first check and see if your communications are blocked or are already clear. Have µTorrent running while you test the port.
The port that µTorrent uses is at Preferences>Network
The port number in your µTorrent should be entered at the port test site.
The Randomize port each start option should be disabled as this could affect router and firewall settings and rarely serves any useful purpose.
Enter the port number from your µTorrent here at the test page and press "Check":
If you failed the port test above, then you should first set your port to a proper one.The most important choice here is to avoid using a port within the 6881-6999 range. This was the range originally used by bittorrent programs and is often blocked by Internet Service Providers (ISPs). (If your port was in this range, change and re-test).
The safest choice is a port in the 49160-65534 range as this will avoid ISP blocks and possible conflicts with other applications. This range used to be 49152-65534, but apparently Vista and Windows 7 grabs some of those ports in between. Vuze-Wiki: Port is Blacklisted
Windows users, if you want to make certain there is no conflict. Go to the command prompt and type in netstat -a >c:\log.txt and the press "Enter". This will check to see which ports are being used and save a text file called "log" at C:\. Looking at the log.txt file, you will know which ports to avoid.
Forwarding The Port
A router will block incoming communications unless an exception is made. All software firewalls will block incoming communications and most will also block outgoing communications, unless an exception is made. If you are "firewalled", then other people will not be able to initiate connections with you (see Why Is Being Firewalled Bad).
As there are many firewalls and routers, this guide can not give explanations as to each. However, there are guides available, on the internet for most firewalls and routers and this guide will link you to them.
Software Firewall - The permission should be set to allow TCP and UDP in both directions. Generally, you will have a choice to set permission for the µTorrent port or for the µTorrent program. Setting permission for the port is the safer choice.
If you are using Windows Firewall, then all you have to do is go to Options>Preferences>Connection in µTorrent and enable the Add Windows Firewall exception option.
Otherwise, you can check these options for guides:
- The help file of your software firewall is the best place to look
- The µTorrent forum has some guides posted
- PortForward.com Firewall Guides(choose firewall and then µTorrent) also has some guides.
Router - There are two choices here. The easier way is to use UPnP. However, this has a possible security issue. Using UPnP allows any program to create a port mapping through the router without consent of the owner. Note: Given the recent findings of Rapid7 regarding security flaws in UPnP, it is generally suggested here that manual forwarding be used. If you still want to use UPnP, then it would be a good idea to test and see if your device is vulnerable to attack through UPnP.
The other choice is to manually forward the port through the router. This does not have that security issue, but involves going through several steps to accomplish. Using the guides linked herein, this should not be that difficult and is the preferred method.
UPnP (NAT-PMP in Apple) - The Easy Way - Enable UPnP (NAT-PMP in Apple) in µTorrent and router.
Manual Forwarding-The Preferred Way
- UPnP (NAT-PMP) Must be disabled in µTorrent (see image above)
- Use the Static IP Guide
Set permission for µTorrent port. This should be set to allow both TCP and UDP communications.
You can check these options for guides:
- The help file of your router is the best place to look
- Portforward.com µTorrent Router Index has guides for most routers
The most important setting here is to cap upload in µTorrent to 80% of your overall upload capacity. Setting upload in µTorrent is a fine line. The more upload you give, the more download you will get from other peers. However, if upload is set too high, or to unlimited, then download speeds will suffer as outgoing communications (acknowledgment signals, resend requests etc) will be interfered with. Other adjustments are made here to distribute your upload so that you receive back the most download from other peers.
Note: (Thanks to Roderunner for reminding me of this)
µTorrent does have a built in speed test and Setup Guide (Options>Setup Guide) that will automatically adjust settings in µTorrent. This is a slightly quicker process than this guide. However, my testing of the Setup Guide settings versus the calculator of this guide showed better speeds with this guide.
First of all, the setup guide only offers settings for certain upload rates. So if your upload rate falls outside their offerings, the settings will not be as precise as those in the calculator below. Even if your upload rate matches one of the offerings exactly, the automatic settings of µTorrent for that rate are not as effective as the ones given by this calculator.
There is not much more involved in entering the settings from the calculator into µTorrent and the increase in download speed will make it worthwhile.
Speed Test: Speedtest.net (Click for Test)
First the upload capacity of your internet connection must be determined by taking an online speed test. Speedtest.net has test locations worldwide and will highlight the one closest to you.
Before taking the speed test, press Settings in the upper right of the speedtest.net page. This will take you to another page. At the bottom of that page is the "Global Settings" options. Set "Speed Measurement" to kilobytes and press "Save" . This will facilitate entry into the calculator below and will lessen confusion as µTorrent shows speeds in kilobytes.
You should stop all internet activity, including torrents, before taking the test and the test should be taken a few times to obtain a reliable average. Results will now show in KiloBytes. It is the upload rate that is important here.
Another Way To Test Upload Speed
For most people these test results will be reliable (Comcast users see Note). However, you may wish to do a double check on real life upload speed. When you are active on a torrent with a good number of peers and you are using your upload cap, set upload to unlimited and watch for about 5-10 minutes and see where upload settles in at. Then input that number into the calculator in the kiloBytes section.
Note: Some ISPs will show inaccurate results on the speed test. If your ISP has anything like Comcast's PowerBoost, then your results will show higher than the actual speed of your connection. PowerBoost provides a burst of download and upload speeds above your provisioned download and upload speeds for the first 10MB and 5MB respectively. Since the speed test involves relatively small files, this will skew results upward.
If you have PowerBoost, or something similar, my findings from my own results and those of others is that the actual speeds are 60% of the test result. So if you get 200kB/s for upload at the test, you should enter 120 in the kB/s box in the calculator. Using Google ("speed result" x .6) will get the proper number to enter in the calculator and this actually turns out to be very accurate. You should end up with the calculator showing a cap that is about half of the test result.
Calculator: Azureus Upload Settings Calculator
Once you have an average upload speed for your connection go to the online Azureus Upload Settings Calculator. Although designed for Azureus, this calculator will work for all bittorrent clients.
This calculator was created by the8472 a contributor to Vuze (fka Azureus) and part of the team that created Bittorrent Protocol Encryption.
Enter your average upload speed in the appropriate box
Input Results Into µTorrent - Screen shots of locations in µTorrent of settings to be adjusted
Peer Sources & Encryption
Having the proper peer sources enabled, such as Peer Exchange (PEX) and Distributed Hash Table (DHT), will help download speeds as they will help you find additional seeds and peers for a torrent. .
Encryption was primarily designed to thwart Internet Service Providers (ISPs) interference with bittorrent. This is rarely used by ISPs nowadays, but having encryption enabled will allow incoming legacy (non-encrypted) connections and will provide you with the largest pool of seeds/peers to select from.
These settings are at Preferences>BitTorrent and should be set as in this image:
The general rule here is to choose torrents that have a high seed to peer ratio. Seeds have 100% of the content associated with the torrent and are only uploading to peers. Peers also upload to other peers, but are also looking for other peers to upload to themselves and their download capacity is almost always higher than their upload capacity.
This applies even though one swarm has significantly more active users than another. For example, a torrent with 30 seeders and 70 peers (30% seeders) will generally be faster than one with 500 seeders and 2500 peers (20% seeders) as the average upload capacity available to the peers will be higher. (TorrentFreak).
For more information see Good Torrents
- Searching for Torrents Popular and unique torrent search sites, with comments.
- Finding Legal (and Free) Torrents sites that offer only legally downloadable and distributable content.
If you still have issues after using this guide and would like some assistance, you may post here or our Forums. The comments section here is not well set up for ongoing discussions, so the forums are a better place.
When posting on a speed issue, please provide
- Your speed test result for both upload and download speed in kiloBytes per second (kBps)
- Your result at canyouseeme, both before taking any steps and after. Just indicate Success or Error do not post your IP address.
If you have a suggestion or correction for the guide, please post here.
Those who wish to post a thanks may post here or in the forums. I always appreciate hearing from those who this helped and I do read the posts regularly. I used to respond to each thanks, but realized it was clogging up the comments section. I thank all those who have posted their appreciation and all those who will.
So, to those who post a "Thanks", I appreciate it.
Please rate this article: