PotPlayer has removed software decoding of HEVC videos, and only supports hardware decoding as of this moment. To enable
Preferences --> Filter Control --> Video Decoder --> HEVC: click the three dots. This opens a video configuration window and under Available Video Decoders, at H265/HEVC, change it from "Built-in FFmpeg Decoder (Recommended)" to "FFmpeg64.dll"
Am using LAV filters as audio/video splitter for PotPlayer anyway.
I had great faith that perhaps this utility could fix what Microsoft's agents have failed to do. I've been unable to update a PC at my church for a couple of years since it last installed a Windows Update. After repeated chat sessions to Microsoft and allowing the agents access which all failed to correct the problem when they tired something that broke their connection. They weren't able to reconnect and left me hanging proving even MS has no idea of how to fix what they broke. I have no other option but to wipe the drive and and reinstall another copy of clugy Windows10 from scratch.
Unfortunately, after downloading it and running it successfully, when I tried to check for updates, it still fails. Even Firefox couldn't update - I had to find and install the complete Firefox 48Mb download to update it but at least that was successful.
Fix WU does one thing. It will re-register a total of 114 .dll, ocx and .ax files which are needed for the proper functioning of Windows Updates. That's it. That's all it does. ¯\_(ツ)_/¯
The utility isn't a registry cleaner and doesn't do the same thing CCleaner does.
There's no way to compare them that I can think of since they aren't the same class or category of software and don't do the same things.
As far as I can tell, it doesn't diagnose errors or issues.
It re-registers files that are part of Windows Update.
There's no log needed, since it does one thing, and one thing only - it re-registers the same fixed set of files every time it's run.
A log would tell you that the 114 files were re-registered. It's the equivalent of the message that pop ups when the files are re-registered that the process was successful.
To the best of my knowledge, re-registering the files doesn't cause an issue if the files hadn't become un-registered.
It looks like Seagate has taken down the Pixel8 site and it now resolves to the Seagate site. No free software there that I can see either. Thanks for letting me know. :)
Le informazioni su come richiamare il debug JIT (Just-In-Time) anziché questa finestra
sono riportate in fondo al messaggio.
************** Testo dell'eccezione **************
System.InvalidOperationException: Questo BackgroundWorker è occupato e non può eseguire più attività contemporaneamente.
in System.ComponentModel.BackgroundWorker.RunWorkerAsync(Object argument)
in System.ComponentModel.BackgroundWorker.RunWorkerAsync()
in FixWindowsUpdate.MainForm.b(Object A_0, EventArgs A_1)
in System.Windows.Forms.Control.OnClick(EventArgs e)
in System.Windows.Forms.Button.OnClick(EventArgs e)
in System.Windows.Forms.Button.WndProc(Message& m)
in System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m)
in System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
in System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
************** Assembly caricati **************
mscorlib
Versione assembly: 2.0.0.0
Versione Win32: 2.0.50727.8806 (QFE.050727-8800)
Base di codice: file:///C:/Windows/Microsoft.NET/Framework/v2.0.50727/mscorlib.dll
----------------------------------------
FixWindowsUpdate
Versione assembly: 1.0.0.0
Versione Win32: 1.0.0.0
Base di codice: file:///C:/Users/NICOSIA%20Vittorio/Documenti/Desktop/Fix%20WU/Fix%20WU/FixWU.exe
----------------------------------------
System.Windows.Forms
Versione assembly: 2.0.0.0
Versione Win32: 2.0.50727.5491 (Win7SP1GDR.050727-5400)
Base di codice: file:///C:/Windows/assembly/GAC_MSIL/System.Windows.Forms/2.0.0.0__b77a5c561934e089/System.Windows.Forms.dll
----------------------------------------
System
Versione assembly: 2.0.0.0
Versione Win32: 2.0.50727.8806 (QFE.050727-8800)
Base di codice: file:///C:/Windows/assembly/GAC_MSIL/System/2.0.0.0__b77a5c561934e089/System.dll
----------------------------------------
System.Drawing
Versione assembly: 2.0.0.0
Versione Win32: 2.0.50727.5495 (Win7SP1GDR.050727-5400)
Base di codice: file:///C:/Windows/assembly/GAC_MSIL/System.Drawing/2.0.0.0__b03f5f7f11d50a3a/System.Drawing.dll
----------------------------------------
System.resources
Versione assembly: 2.0.0.0
Versione Win32: 2.0.50727.5420 (Win7SP1.050727-5400)
Base di codice: file:///C:/Windows/assembly/GAC_MSIL/System.resources/2.0.0.0_it_b77a5c561934e089/System.resources.dll
----------------------------------------
System.Windows.Forms.resources
Versione assembly: 2.0.0.0
Versione Win32: 2.0.50727.5420 (Win7SP1.050727-5400)
Base di codice: file:///C:/Windows/assembly/GAC_MSIL/System.Windows.Forms.resources/2.0.0.0_it_b77a5c561934e089/System.Windows.Forms.resources.dll
----------------------------------------
mscorlib.resources
Versione assembly: 2.0.0.0
Versione Win32: 2.0.50727.8806 (QFE.050727-8800)
What is going on with TechSupportAlert? It used to be the very best resource for checking out different freeware offerings but these days all the reviews I go to are years out of date. Not sure that you'd remember me Ian but my name is Jim and I live in Australia. You and I used to occasionally converse via email, back in the day when your good self and Clif Sipe (aka Clif Notes) were the freeware gurus. Many years ago.
It's a shame to see what was once such a valuable resource go so far downhill.
Hmmmm that's a very good question.
If I understand it correctly, the files that get re-registered are system files - .ocx files are ActiveX files and .dll files are Dynamic Link Library files and are usually found in the Windows directory. They are registered/unregistered using Regsvr32.exe via the command line.
The Registry is a database that stores data related to configuration settings, software and preferences and is accessed via the regedit command. I used both trying to fix the issue I had.
I don't know enough to be sure if the files that are re-registered using Fix WU make any changes to registry keys related to Windows Update.
Some of the sites I checked to get an overview of Fix WU mentioned that it didn't make changes in the registry but didn't give a basis for the statement.
If anyone knows more about this please feel free to add some clarity. In the meanwhile, I've removed the line until more is known. :)
In two immediately adjacent sentences you write
"Fix WU was designed to repair many Windows Update issues by re-registering a total of 114 .dll, ocx and .ax files that Windows Update needs to function properly"
and
"Fix WU doesn’t make any changes to the Windows Registry".
I am more than confused. I - maybe falsely - think that "registering files" actually is making entries in the Windows Registry?
Remember in Firefox if you have chosen "Never Remember History" the option for Private browsing disappears and displays the message "Firefox will use the same settings as private browsing, and will not remember any history as you browse the Web." I'm using Win 10 and Firefox 74.o
That's wonderful, I hope it does the trick. If not and you're comfortable editing the registry there's an entry that sometimes gets corrupted. A search for Windows Update registry keys shoud bring up the specifics. I had both issues. I corrected the registry key and ran this utility and all is well. :)
HTML-NOTEPAD is a WYSIWYG editor of structured documents: texts that have hierarchical and semantically meaningful structure: headers, list, plaintext islands, tables and so on:
https://html-notepad.com/
Session is an end-to-end encrypted messenger that removes sensitive metadata collection, and is designed for people who want privacy and freedom from any forms of surveillance:
https://getsession.org/
You're so welcome. Using an add-on like uBlock Origin or Ghostery takes care of most tracking,
I also use an add-on/extension called Decentraleyes and another called ClearURLs as another layer, available on Chrome & Firefox.
Zemana is the only key logger blocker I know of, though there are probably more. It used to be free, now it's paid software.
At this point, most anti-virus/security programs will detect and block keyloggers. I don't know if they block the keyloggers that some corporations use to track what their employees are typing, though at that level security is probably handled by IT staff.
I use Social Fixer on Facebook.
Thanks. :)
Yes there have been issues, and it's partly because people haven't set up their meetings so they are secure. I've added basic tips to the article and a link to Zoom's blog on how to make meetings safe.
I'm thinking most of these are geared towards the USA. If you have a VPN you should be able to access them. I've updated the article, thanks for letting me know.
"... exa is an improved file lister with more features and better defaults. It uses colours to distinguish file types and metadata. It knows about symlinks, extended attributes, and Git. And it’s small, fast, and just one single binary ...":
https://the.exa.website/https://github.com/ogham/exa
I have Windows 10 Pro on my laptop and am not given the options above when clicking on properties, the field with the in private add on is not editable. Any other suggestions. Thanks.
Girens is a Plex media player client. You can watch and listen to your music, shows and movies with this GTK app:
https://gitlab.gnome.org/tijder/girens
Thanks much for the Autumn pic.
On another note, I can't log in using my email, even though the option allows for it. I can login, however, with my username. Thought I'd pass it along.
Sozi is a zooming presentation editor and player. Unlike in most presentation applications, a Sozi document is not organised as a slideshow, but rather as a poster where the content of your presentation can be freely laid out:
https://sozi.baierouge.fr/pages/10-about.html
Hive Time is a small, bee themed management/base building sim. Harvest resources, grow your hive, and produce a new Queen before the current one dies:
https://cheeseness.itch.io/hive-time
This article is surely resourceful and might benefit a greater part of seekers looking for such valuable posts. Continue updating. Best English practice App :-https://engvarta.com/
I support a number of people (I live in a mature adult community) and I do not get paid for my services, its volunteer. About a year ago, TeamViewer determined that I must be commercial; Im presuming because I had about 35 computers in my access list (7 of these systems were mine). They now limit my connection sessions to 5 minutes, with a wait time of 10 minutes between each session.
This was a wonderful tool and I miss it but Im not willing to pay for a licence to support users I do not charge. And I dont want to absorb the price of this volunteer work.
I dumped TeamViewer and now use google remote desktop for clients that have a google account or I use the Windows Quick Assist. I no longer have the ability to access unattended but thats not a problem since now I just require the users to be there when I access the systems. A bit inconvenient for them but thats what they have to deal with for no charge to them.
Nami is a decentralized binary package manager, it allows software authors to publish their software anywhere, without having to request a merge from a software center for each update:
https://github.com/txthinking/nami
I like Zoho products, I've used some of them for many years. Thanks for the heads up, I didn't know they had an remote assistance program that works cross platform, I'll have a look at it. :)
I didn't run into any issues with Team Viewer or AnyDesk but Team Viewer may have changed something in the last few days. Quick Assist is good for Windows 10 users. I havent tried Google's Remote Desktop, thanks for the input. :)
Used to use TeamViewer, was great. Now its limited to 5 minutes per session if you dont pay. I dumped it.
2 alternatives that Ive tried: Google remote desktop if you are just going into your system remotely or have a google pw on the receiving machine. Smooth operation once you get in. But doesnt work well for support because there still are a lot of people that dont have a Google account.
The other comes standard in the OS from MS: Quick Assist. Its a 2 way auth tool that gives you total control of the users screen. Ive used it several times with very new Win 10 users and with a bit of coaching, get in with no problem. Note that the user must input a code and then in the 3rd part of auth, they must allow you access, so you cant use this without user assistance at the keyboard. Its a me, you, me, you thing. Dont know when it started showing up in Win 10, but its in the latest 2 versions. Not sure about older ones.
Recently, many people have got a popup message in TeamViewer: "Your TeamViewer Plan is not valid". But it still works. It seems to be an error which may have been fixed by now with the latest update of TeamViewer.
This is a great (and currently relevant) topic. I've provided "support" to many family members over the years and have tried a bunch of different products. For our small business and home we use Zoho Assist which is free for "on demand" support which allows you to connect to another computer or the other user to connect to you. It's an enterprise level product that has worked well for me. Many of our business clients have Apple laptops and desktops and I can connect to them for training as easily as a windows computer.
DrBones
Good to know - I used it for many years but then a year, perhaps two years, ago I got a popup that it was upgrading to a new version that would require a paid license. At that point, I dropped it. It appears they reversed course which is excellent.
From the TeamViewer website: "From the very beginning, TeamViewer has been available to everyone completely free of charge for personal, non-commercial use. Get Started Now! It’s free for personal use or as a trial version for business users." MC - Site Manager.
You most certainly are correct.
What bugged me most was: First the free version allowed me to use it one my main machine at home, my carry along laptop when i do customer visits, my Android phone, my wife's computer a.s.o.
Then they change their policies - which is their good right, I admit - and suddenly it was only two systems. ;-)
I love that site, I'm glad they put a coronavirus page. Really clean interface with minimal data presented so you can find more if you're interested. Nice.
I'm asking because I viewed all of the sites in Google Chrome with no extensions other than a password manager (standard practice on my end) and saw no ads on any of the sites. The Bing site has a column of news articles but I see no ads there.
I use Google Chrome to test sites with only a password manager installed, no ad blocker or anything else, because it's the most commonly used browser.
I'm not seeing any ads on the Worldometers site either, if that's the site you're referring to.
"... FDNS was designed to run as a local DoH proxy on a Linux desktop, or as a server for a small network. Lean and mean, it protects the computers against some of the most common cyber threats, all while improving the privacy and the system performance ...":
https://firejaildns.wordpress.com
"... Pop Shell is a keyboard-driven layer for GNOME Shell which allows for quick and sensible navigation and management of windows ...":
https://github.com/pop-os/shell
The textual info at the bottom is nice and the page is loaded with tons of charts and graphs filled with all the same info found on the Johns Hopkins dashboard. Otherwise, even with a basic popup blocker running, the site is riddled with ads. And rather than be convenient and tidy, the informational charts and graphs are spread out on a long scrolling, bright white page. The aesthetics alone are a huge turn off for me. But, the more options we have to find this information, the better in my opinion.
@Malbec, please try it again with a new Android download link using a Bitly short URL for the time being. The original long download link with a query string is being truncated due to a faulty Drupal module.
The link to Google Play is broken, and a direct search on Google's site gives dozens of apps with this same name...
Could you correct this, please?
Thanx
It's up and down for me. Sometimes it returns the database error and sometimes it loads but the site doesn't seem to be loading properly. Looks like they are having issues with the server. I'll keep an eye on it, thanks for the heads up.
This is a list of the most recently posted comments on the site sorted so that the most recent comments appear first.
You can however sort the list on Article title by clicking on the column heading. To see actual comments click the + sign.
PotPlayer has removed software decoding of HEVC videos, and only supports hardware decoding as of this moment. To enable
Preferences --> Filter Control --> Video Decoder --> HEVC: click the three dots. This opens a video configuration window and under Available Video Decoders, at H265/HEVC, change it from "Built-in FFmpeg Decoder (Recommended)" to "FFmpeg64.dll"
Am using LAV filters as audio/video splitter for PotPlayer anyway.
Thanx, rhiannon, I have contacted the author to see if he has any idea.
Great site, been using in for longer than I care to say!
Windows 10 presents a host of new issues to deal with.
To clarify, are you saying that running this utility has caused Firefox to stop updating?
Have you checked in Services to make sure that Windows Update is enabled?
You might want to try PatchMyPC to keep up with updates for a wide variety of common and popular programs.
It doesn't have anything to do with any Windows updates but covers many other programs.
I had great faith that perhaps this utility could fix what Microsoft's agents have failed to do. I've been unable to update a PC at my church for a couple of years since it last installed a Windows Update. After repeated chat sessions to Microsoft and allowing the agents access which all failed to correct the problem when they tired something that broke their connection. They weren't able to reconnect and left me hanging proving even MS has no idea of how to fix what they broke. I have no other option but to wipe the drive and and reinstall another copy of clugy Windows10 from scratch.
Unfortunately, after downloading it and running it successfully, when I tried to check for updates, it still fails. Even Firefox couldn't update - I had to find and install the complete Firefox 48Mb download to update it but at least that was successful.
Fix WU does one thing. It will re-register a total of 114 .dll, ocx and .ax files which are needed for the proper functioning of Windows Updates. That's it. That's all it does. ¯\_(ツ)_/¯
Hmmmm I don't know what to make of that. Did you run the program with elevated privileges?
The utility isn't a registry cleaner and doesn't do the same thing CCleaner does.
There's no way to compare them that I can think of since they aren't the same class or category of software and don't do the same things.
As far as I can tell, it doesn't diagnose errors or issues.
It re-registers files that are part of Windows Update.
There's no log needed, since it does one thing, and one thing only - it re-registers the same fixed set of files every time it's run.
A log would tell you that the 114 files were re-registered. It's the equivalent of the message that pop ups when the files are re-registered that the process was successful.
To the best of my knowledge, re-registering the files doesn't cause an issue if the files hadn't become un-registered.
You can contact the developer and ask for a list of the 114 files that get re-registered and find out more here:
https://www.thewindowsclub.com/repair-fix-windows-updates-with-fix-wu-ut...
Thank you for the tip.
It looks like Seagate has taken down the Pixel8 site and it now resolves to the Seagate site. No free software there that I can see either. Thanks for letting me know. :)
Hi, all...
Regretfully it failed miserably...
Error message follows:
Le informazioni su come richiamare il debug JIT (Just-In-Time) anziché questa finestra
sono riportate in fondo al messaggio.
************** Testo dell'eccezione **************
System.InvalidOperationException: Questo BackgroundWorker è occupato e non può eseguire più attività contemporaneamente.
in System.ComponentModel.BackgroundWorker.RunWorkerAsync(Object argument)
in System.ComponentModel.BackgroundWorker.RunWorkerAsync()
in FixWindowsUpdate.MainForm.b(Object A_0, EventArgs A_1)
in System.Windows.Forms.Control.OnClick(EventArgs e)
in System.Windows.Forms.Button.OnClick(EventArgs e)
in System.Windows.Forms.Button.WndProc(Message& m)
in System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m)
in System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
in System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
************** Assembly caricati **************
mscorlib
Versione assembly: 2.0.0.0
Versione Win32: 2.0.50727.8806 (QFE.050727-8800)
Base di codice: file:///C:/Windows/Microsoft.NET/Framework/v2.0.50727/mscorlib.dll
----------------------------------------
FixWindowsUpdate
Versione assembly: 1.0.0.0
Versione Win32: 1.0.0.0
Base di codice: file:///C:/Users/NICOSIA%20Vittorio/Documenti/Desktop/Fix%20WU/Fix%20WU/FixWU.exe
----------------------------------------
System.Windows.Forms
Versione assembly: 2.0.0.0
Versione Win32: 2.0.50727.5491 (Win7SP1GDR.050727-5400)
Base di codice: file:///C:/Windows/assembly/GAC_MSIL/System.Windows.Forms/2.0.0.0__b77a5c561934e089/System.Windows.Forms.dll
----------------------------------------
System
Versione assembly: 2.0.0.0
Versione Win32: 2.0.50727.8806 (QFE.050727-8800)
Base di codice: file:///C:/Windows/assembly/GAC_MSIL/System/2.0.0.0__b77a5c561934e089/System.dll
----------------------------------------
System.Drawing
Versione assembly: 2.0.0.0
Versione Win32: 2.0.50727.5495 (Win7SP1GDR.050727-5400)
Base di codice: file:///C:/Windows/assembly/GAC_MSIL/System.Drawing/2.0.0.0__b03f5f7f11d50a3a/System.Drawing.dll
----------------------------------------
System.resources
Versione assembly: 2.0.0.0
Versione Win32: 2.0.50727.5420 (Win7SP1.050727-5400)
Base di codice: file:///C:/Windows/assembly/GAC_MSIL/System.resources/2.0.0.0_it_b77a5c561934e089/System.resources.dll
----------------------------------------
System.Windows.Forms.resources
Versione assembly: 2.0.0.0
Versione Win32: 2.0.50727.5420 (Win7SP1.050727-5400)
Base di codice: file:///C:/Windows/assembly/GAC_MSIL/System.Windows.Forms.resources/2.0.0.0_it_b77a5c561934e089/System.Windows.Forms.resources.dll
----------------------------------------
mscorlib.resources
Versione assembly: 2.0.0.0
Versione Win32: 2.0.50727.8806 (QFE.050727-8800)
Ideas, suggestions, hats in the ring?
Thanx!
Does this Fix WU Utility let you know what problems exist prior to fixing?
Is a LOG made of changes by this program?
How does this compare with the Registry Cleaner in CCleaner FREE?
How is this different from FixWin10 ? hxxps://xxx.thewindowsclub-dot-com/fixwin-for-windows-10
What is going on with TechSupportAlert? It used to be the very best resource for checking out different freeware offerings but these days all the reviews I go to are years out of date. Not sure that you'd remember me Ian but my name is Jim and I live in Australia. You and I used to occasionally converse via email, back in the day when your good self and Clif Sipe (aka Clif Notes) were the freeware gurus. Many years ago.
It's a shame to see what was once such a valuable resource go so far downhill.
I can't find any free software at all on here
I like that one, thanks! I've got explore.org to add and I'll include this one with it. :)
Visit places all over the Earth using LIVE Webcams ! https://www.earthcam.com/ I like sharing this one ;)
Hmmmm that's a very good question.
If I understand it correctly, the files that get re-registered are system files - .ocx files are ActiveX files and .dll files are Dynamic Link Library files and are usually found in the Windows directory. They are registered/unregistered using Regsvr32.exe via the command line.
The Registry is a database that stores data related to configuration settings, software and preferences and is accessed via the regedit command. I used both trying to fix the issue I had.
I don't know enough to be sure if the files that are re-registered using Fix WU make any changes to registry keys related to Windows Update.
Some of the sites I checked to get an overview of Fix WU mentioned that it didn't make changes in the registry but didn't give a basis for the statement.
If anyone knows more about this please feel free to add some clarity. In the meanwhile, I've removed the line until more is known. :)
That's fantastic! I'm so glad it's working again. :)
In two immediately adjacent sentences you write
"Fix WU was designed to repair many Windows Update issues by re-registering a total of 114 .dll, ocx and .ax files that Windows Update needs to function properly"
and
"Fix WU doesn’t make any changes to the Windows Registry".
I am more than confused. I - maybe falsely - think that "registering files" actually is making entries in the Windows Registry?
Woo-Hoo !...
it worked !
Thanks rhiannon
Remember in Firefox if you have chosen "Never Remember History" the option for Private browsing disappears and displays the message "Firefox will use the same settings as private browsing, and will not remember any history as you browse the Web." I'm using Win 10 and Firefox 74.o
That's wonderful, I hope it does the trick. If not and you're comfortable editing the registry there's an entry that sometimes gets corrupted. A search for Windows Update registry keys shoud bring up the specifics. I had both issues. I corrected the registry key and ran this utility and all is well. :)
Thanks rhiannon..
just what I needed.
My windows 7 update has been broken for almost two years now.
Hopefully, this will fix it !
Stay safe, stay well !
As of the versions lately I can use T-bird for Yahoo, Outlook.com and GNail with NO problems.
Of course must use IMAP but not a problem at all.
You're so welcome. Using an add-on like uBlock Origin or Ghostery takes care of most tracking,
I also use an add-on/extension called Decentraleyes and another called ClearURLs as another layer, available on Chrome & Firefox.
Zemana is the only key logger blocker I know of, though there are probably more. It used to be free, now it's paid software.
At this point, most anti-virus/security programs will detect and block keyloggers. I don't know if they block the keyloggers that some corporations use to track what their employees are typing, though at that level security is probably handled by IT staff.
I use Social Fixer on Facebook.
Thanks Rhiannon for helping make our lives simpler and safer with your essential tips
Personal data mining and cookies are an ongoing scourge, and so any other tips including utilities that block keylogging, are appreciated !
Please note there have recently been problems with hackers accessing Zoom sessions. It is important to set passwords for sessions with Zoom:
https://krebsonsecurity.com/2020/04/war-dialing-tool-exposes-zooms-password-problems/
Thanks. :)
Yes there have been issues, and it's partly because people haven't set up their meetings so they are secure. I've added basic tips to the article and a link to Zoom's blog on how to make meetings safe.
Thank you. :)
I'm thinking most of these are geared towards the USA. If you have a VPN you should be able to access them. I've updated the article, thanks for letting me know.
https://www.howtogeek.com/210614/how-to-access-region-restricted-website...
With reference to:
359 free movies to watch on YouTube
Great Idea, just that some are Private videos and unavailable and all the others that I clicked on are unavailable in UK
Going above and beyond, now that's tech support. Good on ya Gizmo and team.
You're very welcome. :)
That's a great selection rhiannon. Well done & thank you.
It doesn't work on any of these.
Which browser are you using?
I have Windows 10 Pro on my laptop and am not given the options above when clicking on properties, the field with the in private add on is not editable. Any other suggestions. Thanks.
This software has recently started nagging me to upgrade. Had weeks of it over the New Year, and now it's at it again. During a pandemic. Grrr!
Thanks much for the Autumn pic.
On another note, I can't log in using my email, even though the option allows for it. I can login, however, with my username. Thought I'd pass it along.
This article is surely resourceful and might benefit a greater part of seekers looking for such valuable posts. Continue updating. Best English practice App :-https://engvarta.com/
i liked this post so much
https://getsharey.com/about-pdf-drive/
I support a number of people (I live in a mature adult community) and I do not get paid for my services, its volunteer. About a year ago, TeamViewer determined that I must be commercial; Im presuming because I had about 35 computers in my access list (7 of these systems were mine). They now limit my connection sessions to 5 minutes, with a wait time of 10 minutes between each session.
This was a wonderful tool and I miss it but Im not willing to pay for a licence to support users I do not charge. And I dont want to absorb the price of this volunteer work.
I dumped TeamViewer and now use google remote desktop for clients that have a google account or I use the Windows Quick Assist. I no longer have the ability to access unattended but thats not a problem since now I just require the users to be there when I access the systems. A bit inconvenient for them but thats what they have to deal with for no charge to them.
Thank you for this nifty utility. I hope it supports Unicode: I often need to input Chinese text
Good one! I think it will be good if you add more video streaming platform.
I would like to introduce New video streaming platform Mobiotics
You're very welcome. :) I'm glad you like it.
I like Zoho products, I've used some of them for many years. Thanks for the heads up, I didn't know they had an remote assistance program that works cross platform, I'll have a look at it. :)
Team Viewer has apparently been revoking licenses for what they deem commercial activity. I hadn't heard of that error message, thanks.
You're very welcome. :)
I didn't run into any issues with Team Viewer or AnyDesk but Team Viewer may have changed something in the last few days. Quick Assist is good for Windows 10 users. I havent tried Google's Remote Desktop, thanks for the input. :)
really like this one thank you, Rhiannon
Used to use TeamViewer, was great. Now its limited to 5 minutes per session if you dont pay. I dumped it.
2 alternatives that Ive tried: Google remote desktop if you are just going into your system remotely or have a google pw on the receiving machine. Smooth operation once you get in. But doesnt work well for support because there still are a lot of people that dont have a Google account.
The other comes standard in the OS from MS: Quick Assist. Its a 2 way auth tool that gives you total control of the users screen. Ive used it several times with very new Win 10 users and with a bit of coaching, get in with no problem. Note that the user must input a code and then in the 3rd part of auth, they must allow you access, so you cant use this without user assistance at the keyboard. Its a me, you, me, you thing. Dont know when it started showing up in Win 10, but its in the latest 2 versions. Not sure about older ones.
Try Quick Assist, its working for me.
Recently, many people have got a popup message in TeamViewer: "Your TeamViewer Plan is not valid". But it still works. It seems to be an error which may have been fixed by now with the latest update of TeamViewer.
This is a great (and currently relevant) topic. I've provided "support" to many family members over the years and have tried a bunch of different products. For our small business and home we use Zoho Assist which is free for "on demand" support which allows you to connect to another computer or the other user to connect to you. It's an enterprise level product that has worked well for me. Many of our business clients have Apple laptops and desktops and I can connect to them for training as easily as a windows computer.
DrBones
Good to know - I used it for many years but then a year, perhaps two years, ago I got a popup that it was upgrading to a new version that would require a paid license. At that point, I dropped it. It appears they reversed course which is excellent.
TeamViewer is no longer free for personal use. Anydesk still is.
Thanks! Very informative.
I needed to compare two HTML files today and found both Beyond Compare 3 and ExamDiff lacking.
In my search I found the free version of Code Compare at:
https://www.devart.com/codecompare/
And it is great! It has wordwrap, which was missing from the other two, and made comparing the files very easy.
Check it out.
You most certainly are correct.
What bugged me most was: First the free version allowed me to use it one my main machine at home, my carry along laptop when i do customer visits, my Android phone, my wife's computer a.s.o.
Then they change their policies - which is their good right, I admit - and suddenly it was only two systems. ;-)
I love that site, I'm glad they put a coronavirus page. Really clean interface with minimal data presented so you can find more if you're interested. Nice.
I'm asking because I viewed all of the sites in Google Chrome with no extensions other than a password manager (standard practice on my end) and saw no ads on any of the sites. The Bing site has a column of news articles but I see no ads there.
I use Google Chrome to test sites with only a password manager installed, no ad blocker or anything else, because it's the most commonly used browser.
I'm not seeing any ads on the Worldometers site either, if that's the site you're referring to.
You're very welcome. I've been using it and quite like it, and there are no limits on amount of content as there is with the free version of Evernote.
Thank you Ms. rhiannon.
Seems to FINALLY be a way around the limitation(s) of Evernote.
I use several ad/popup blockers, and don't see any of those ads. But, I agree that more options for keeping informed and up-to-date is good.
The textual info at the bottom is nice and the page is loaded with tons of charts and graphs filled with all the same info found on the Johns Hopkins dashboard. Otherwise, even with a basic popup blocker running, the site is riddled with ads. And rather than be convenient and tidy, the informational charts and graphs are spread out on a long scrolling, bright white page. The aesthetics alone are a huge turn off for me. But, the more options we have to find this information, the better in my opinion.
In addition to the Johns Hopkins dashboard and nCoV2019 version, here is another I've found to be worthwhile.
https://www.worldometers.info/coronavirus/
I would like to find a Optical Drive software.
https://play.google.com/store/apps/details?id=ua.co.cts.sideup&hl=en_US
The link to Google Play is broken, and a direct search on Google's site gives dozens of apps with this same name...
Could you correct this, please?
Thanx
The link seems to be working now.
It's up and down for me. Sometimes it returns the database error and sometimes it loads but the site doesn't seem to be loading properly. Looks like they are having issues with the server. I'll keep an eye on it, thanks for the heads up.
This page has links to some of the participants and a partial list at the bottom of the page.
https://mymodernmet.com/color-our-collections-2019/
fyi the link to "Download Free Coloring Pages From 100+ Top Libraries and Museums" replies "Error establishing a database connection".
Pages